diff --git a/CLAUDE.md b/CLAUDE.md index 13bd9dc..dfbc1c5 100644 --- a/CLAUDE.md +++ b/CLAUDE.md @@ -38,10 +38,11 @@ since it's expected to run 10-15 pages (`\input`, not `\include` — `\include` forces a `\clearpage` per file, which doesn't suit a short continuously-flowing journal article): - - [sections/](sections/) holds the body, one file per section - (`introduction.tex`, `related_work.tex`, `method.tex`, - `experiment.tex`, `discussion.tex`, `conclusion.tex`), `\input` from - `main.tex` right after each `\section{...}` heading. + - [sections/](sections/) holds the body, one file per section, numbered + to match reading order (`1_introduction.tex`, `2_related_work.tex`, + `3_method.tex`, `4_experiment.tex`, `5_discussion.tex`, + `6_conclusion.tex`), `\input` from `main.tex` right after each + `\section{...}` heading. There's no `0_abstract.tex` — see above. - [figures/](figures/) holds figure images; subfolder per section if it grows large. - The **Abstract is the one exception** — it stays written inline inside diff --git a/main.tex b/main.tex index 0a0edfe..9767904 100644 --- a/main.tex +++ b/main.tex @@ -160,27 +160,27 @@ %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \section{Introduction} -\input{sections/introduction} +\input{sections/1_introduction} %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \section{Related Work} -\input{sections/related_work} +\input{sections/2_related_work} %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \section{Method} -\input{sections/method} +\input{sections/3_method} %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \section{Experiments} -\input{sections/experiment} +\input{sections/4_experiment} %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \section{Discussion} -\input{sections/discussion} +\input{sections/5_discussion} %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \section{Conclusions} -\input{sections/conclusion} +\input{sections/6_conclusion} %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % Optional section, not part of this manuscript's outline; add back if needed: diff --git a/sections/1_introduction.tex b/sections/1_introduction.tex new file mode 100644 index 0000000..7157fd3 --- /dev/null +++ b/sections/1_introduction.tex @@ -0,0 +1 @@ +The introduction should briefly place the study in a broad context and highlight why it is important. It should define the purpose of the work and its significance. The current state of the research field should be reviewed carefully and key publications cited. Please highlight controversial and diverging hypotheses when necessary. Finally, briefly mention the main aim of the work and highlight the principal conclusions. As far as possible, please keep the introduction comprehensible to scientists outside your particular field of research. Citing a journal paper \citep{ref-journal}. Now citing a book reference \citep{ref-book1,ref-book2} or other reference types \citep{ref-unpublish,ref-url}. Please use the command \citep{ref-proceeding,ref-thesis} for the following MDPI journals, which use author--date citation: Administrative Sciences, AI in Education, Arts, Behavioral Sciences, Businesses, Econometrics, Economies, Education Sciences, European Journal of Investigation in Health, Psychology and Education, Family Sciences, Future Collections, Libraries, Archives, and Museums, Games, Genealogy, Histories, Humanities, Humans, International Journal of Cognitive Sciences, International Journal of Financial Studies, Investment, Journal of Intelligence, Journalism and Media, Journal of Risk and Financial Management, Journal of Strategic and Applied Marketing, Languages, Laws, Literature, Operations Management, Peace Studies, Project Management Horizons, Psychology International, Publications, Religions, Risks, Social Sciences, Tourism and Hospitality, Youth. diff --git a/sections/2_related_work.tex b/sections/2_related_work.tex new file mode 100644 index 0000000..caf8951 --- /dev/null +++ b/sections/2_related_work.tex @@ -0,0 +1,11 @@ +% TODO: Related Work. +% This section did not exist in the original MDPI template (which goes +% straight from Introduction to Materials and Methods) -- it is new for +% this manuscript. Summarize prior work on IVUS-based prediction of +% no-reflow/slow-flow after PCI and related CNN-LSTM / image-based +% approaches, positioning this paper's contribution relative to it. +% +% Per CLAUDE.md: Reference/main.tex, Reference/main_ja.tex, and the +% thesis PDF are useful for prose style and terminology, but any numbers, +% dataset descriptions, or results cited here must come from current +% data the user provides -- not copied from those older documents. diff --git a/sections/3_method.tex b/sections/3_method.tex new file mode 100644 index 0000000..a31772e --- /dev/null +++ b/sections/3_method.tex @@ -0,0 +1,11 @@ +The Materials and Methods should be described with sufficient detail to allow others to replicate and build on the published results. Please note that the publication of your manuscript implies that you must make all materials, data, computer code, and protocols associated with the publication available to readers. Please disclose at the submission stage any restrictions on the availability of materials or information. New methods and protocols should be described in detail while well-established methods can be briefly described and appropriately cited. + +Research manuscripts reporting large datasets that are deposited in a publicly available database should specify where the data have been deposited and provide the relevant accession numbers. If the accession numbers have not yet been obtained at the time of submission, please state that they will be provided during review. They must be provided prior to publication. + +Interventionary studies involving animals or humans, and other studies that require ethical approval, must list the authority that provided approval and the corresponding ethical approval code. + +In this section, where applicable, authors are required to disclose details of how generative artificial intelligence (GenAI) has been used in this paper (e.g., to generate text, data, or graphics, or to assist in study design, data collection, analysis, or interpretation). The use of GenAI for superficial text editing (e.g., grammar, spelling, punctuation, and formatting) does not need to be declared. + +\begin{quote} +This is an example of a quote. +\end{quote} diff --git a/sections/4_experiment.tex b/sections/4_experiment.tex new file mode 100644 index 0000000..e3e88d7 --- /dev/null +++ b/sections/4_experiment.tex @@ -0,0 +1,162 @@ +This section may be divided by subheadings. It should provide a concise and precise description of the experimental results, their interpretation, and the experimental conclusions that can be drawn. + +\subsection{Subsection} +\subsubsection{Subsubsection} + +Bulleted lists look like this: +\begin{itemize} +\item First bullet; +\item Second bullet; +\item Third bullet. +\end{itemize} + +Numbered lists can be added as follows: +\begin{enumerate} +\item First item; +\item Second item; +\item Third item. +\end{enumerate} + +The text continues here. + +\subsection{Figures, Tables and Schemes} + +All figures and tables should be cited in the main text as Figure~\ref{fig1}, Table~\ref{tab1}, etc. + +\begin{figure}[H] +%\isPreprints{\centering}{} % Only used for preprints +\includegraphics[width=8.0 cm]{Definitions/logo-mdpi} +\caption{This is a figure. Schemes follow the same formatting.\label{fig1}} +\end{figure} +\unskip + +\begin{table}[H] +%\small % Change table font size +\caption{This is a table caption. Tables should be placed in the main text near the first time they are~cited.\label{tab1}} +%\isPreprints{\centering}{} % Only used for preprints +\begin{tabularx}{\textwidth}{CCC} +\toprule +\textbf{Title 1} & \textbf{Title 2} & \textbf{Title 3}\\ +\midrule +Entry 1 & Data & Data\\ +Entry 2 & Data & Data \textsuperscript{1}\\ +\bottomrule +\end{tabularx} + +\noindent{\small{\textsuperscript{1} Tables may have a footer.}} +\end{table} + +The text continues here (Figure~\ref{fig2} and Table~\ref{tab2}). + +% Example of a figure that spans the whole page width and with subfigures. The same concept works for tables, too. +\begin{figure}[H] +%\isPreprints{}{% This command is only used for ``preprints''. +\begin{adjustwidth}{-\extralength}{0cm} +\centering +%} % If the paper is ``preprints'', please uncomment this parenthesis. +\subfloat[\centering]{\includegraphics[width=7.0cm]{Definitions/logo-mdpi}} +%\hfill +\subfloat[\centering]{\includegraphics[width=7.0cm]{Definitions/logo-mdpi}}\\ +\subfloat[\centering]{\includegraphics[width=7.0cm]{Definitions/logo-mdpi}} +%\hfill +\subfloat[\centering]{\includegraphics[width=7.0cm]{Definitions/logo-mdpi}} +%\isPreprints{}{% This command is only used for ``preprints''. +\end{adjustwidth} +%} % If the paper is ``preprints'', please uncomment this parenthesis. +\caption{This is a wide figure. Schemes follow the same formatting. If there are multiple panels, they should be listed as follows: (\textbf{a}) Description of what is contained in the first panel. (\textbf{b}) Description of what is contained in the second panel. (\textbf{c}) Description of what is contained in the third panel. (\textbf{d}) Description of what is contained in the fourth panel. Figures should be placed in the main text near the first time they are cited.\label{fig2}} +\end{figure} + +\begin{table}[H] +\caption{This is a wide table. Tables should be placed in the main text near the first time they are~cited.\label{tab2}} +%\isPreprints{\centering}{% This command is only used for ``preprints''. + \begin{adjustwidth}{-\extralength}{0cm} +%} % If the paper is ``preprints'', please uncomment this parenthesis. +%\isPreprints{\begin{tabularx}{\textwidth}{CCCC}}{% This command is only used for ``preprints''. + \begin{tabularx}{\fulllength}{CCCC} +%} % If the paper is ``preprints'', please uncomment this parenthesis. + \toprule + \textbf{Title 1} & \textbf{Title 2} & \textbf{Title 3} & \textbf{Title 4}\\ + \midrule +\multirow[m]{3}{*}{Entry 1 *} & Data & Data & Data\\ + & Data & Data & Data\\ + & Data & Data & Data\\ + \midrule +\multirow[m]{3}{*}{Entry 2} & Data & Data & Data\\ + & Data & Data & Data\\ + & Data & Data & Data\\ + \bottomrule + \end{tabularx} +% \isPreprints{}{% This command is only used for ``preprints''. + \end{adjustwidth} +%} % If the paper is ``preprints'', please uncomment this parenthesis. + \noindent{\small{* Tables may have a footer.}} +\end{table} + +%\begin{listing}[H] +%\caption{Title of the listing} +%\rule{\columnwidth}{1pt} +%\raggedright Text of the listing. In font size footnotesize, small, or normalsize. Preferred format: left aligned and single spaced. Preferred border format: top border line and bottom border line. +%\rule{\columnwidth}{1pt} +%\end{listing} + +Text. + +Text. + +\subsection{Formatting of Mathematical Components} + +This is example 1 of an equation: +\begin{equation} +a = 1, +\end{equation} +the text following an equation need not be a new paragraph if it continues a sentence. Please punctuate equations as regular text. + +This is example 2 of an equation: +%\isPreprints{}{% This command is only used for ``preprints''. +\begin{adjustwidth}{-\extralength}{0cm} +%} % If the paper is ``preprints'', please uncomment this parenthesis. +\begin{equation} +a = b + c + d + e + f + g + h + i + j + k + l + m + n + o + p + q + r + s + t + u + v + w + x + y + z +\end{equation} +%\isPreprints{}{% This command is only used for ``preprints''. +\end{adjustwidth} +%} % If the paper is ``preprints'', please uncomment this parenthesis. + +If the text following an equation starts a new sentence, it should be a new paragraph. Please punctuate equations as regular text. + +%% Example of a page in landscape format (with table and table footnote). +%\startlandscape +%\begin{table}[H] %% Table in wide page +%%\isPreprints{\centering}{} % This command is only used for ``preprints''. +%\caption{This is a very wide table.\label{tab3}} +% \begin{tabularx}{\textwidth}{CCCC} +% \toprule +% \textbf{Title 1} & \textbf{Title 2} & \textbf{Title 3} & \textbf{Title 4}\\ +% \midrule +% Entry 1 & Data & Data & This cell has some longer content that runs over two lines.\\ +% Entry 2 & Data & Data & Data\textsuperscript{1}\\ +% \bottomrule +% \end{tabularx} +%%\isPreprints{}{% This command is only used for ``preprints''. +% \begin{adjustwidth}{+\extralength}{0cm} +%%} % If the paper is ``preprints'', please uncomment this parenthesis. +% \noindent\small{\textsuperscript{1} This is a table footnote.} +%%\isPreprints{}{% This command is only used for ``preprints''. +% \end{adjustwidth} +%%} % If the paper is ``preprints'', please uncomment this parenthesis. +%\end{table} +%\finishlandscape + +Theorem-type environments (including propositions, lemmas, corollaries, etc.) can be formatted as follows: +%% Example of a theorem: +\begin{Theorem} +Example text of a theorem. Theorems, propositions, lemmas, etc., should be numbered sequentially (i.e., Proposition 2 follows Theorem 1). Examples or Remarks use the same formatting, but should be numbered separately, so a document may contain Theorem 1, Remark 1 and Example~1. +\end{Theorem} + +The text continues here. Proofs must be formatted as follows: + +%% Example of a proof: +\begin{proof}[Proof of Theorem 1] +Text of the proof. Note that the phrase ``of Theorem 1'' is optional if it is clear which theorem is being referred to. +\end{proof} +The text continues here. diff --git a/sections/5_discussion.tex b/sections/5_discussion.tex new file mode 100644 index 0000000..a841507 --- /dev/null +++ b/sections/5_discussion.tex @@ -0,0 +1 @@ +Authors should discuss the results and how they can be interpreted from the perspective of previous studies and of the working hypotheses. The findings and their implications should be discussed in the broadest context possible. Future research directions may also be highlighted. diff --git a/sections/6_conclusion.tex b/sections/6_conclusion.tex new file mode 100644 index 0000000..c47d1a8 --- /dev/null +++ b/sections/6_conclusion.tex @@ -0,0 +1 @@ +This section is not mandatory but can be added to the manuscript if the discussion is unusually long or complex. diff --git a/sections/conclusion.tex b/sections/conclusion.tex deleted file mode 100644 index c47d1a8..0000000 --- a/sections/conclusion.tex +++ /dev/null @@ -1 +0,0 @@ -This section is not mandatory but can be added to the manuscript if the discussion is unusually long or complex. diff --git a/sections/discussion.tex b/sections/discussion.tex deleted file mode 100644 index a841507..0000000 --- a/sections/discussion.tex +++ /dev/null @@ -1 +0,0 @@ -Authors should discuss the results and how they can be interpreted from the perspective of previous studies and of the working hypotheses. The findings and their implications should be discussed in the broadest context possible. Future research directions may also be highlighted. diff --git a/sections/experiment.tex b/sections/experiment.tex deleted file mode 100644 index e3e88d7..0000000 --- a/sections/experiment.tex +++ /dev/null @@ -1,162 +0,0 @@ -This section may be divided by subheadings. It should provide a concise and precise description of the experimental results, their interpretation, and the experimental conclusions that can be drawn. - -\subsection{Subsection} -\subsubsection{Subsubsection} - -Bulleted lists look like this: -\begin{itemize} -\item First bullet; -\item Second bullet; -\item Third bullet. -\end{itemize} - -Numbered lists can be added as follows: -\begin{enumerate} -\item First item; -\item Second item; -\item Third item. -\end{enumerate} - -The text continues here. - -\subsection{Figures, Tables and Schemes} - -All figures and tables should be cited in the main text as Figure~\ref{fig1}, Table~\ref{tab1}, etc. - -\begin{figure}[H] -%\isPreprints{\centering}{} % Only used for preprints -\includegraphics[width=8.0 cm]{Definitions/logo-mdpi} -\caption{This is a figure. Schemes follow the same formatting.\label{fig1}} -\end{figure} -\unskip - -\begin{table}[H] -%\small % Change table font size -\caption{This is a table caption. Tables should be placed in the main text near the first time they are~cited.\label{tab1}} -%\isPreprints{\centering}{} % Only used for preprints -\begin{tabularx}{\textwidth}{CCC} -\toprule -\textbf{Title 1} & \textbf{Title 2} & \textbf{Title 3}\\ -\midrule -Entry 1 & Data & Data\\ -Entry 2 & Data & Data \textsuperscript{1}\\ -\bottomrule -\end{tabularx} - -\noindent{\small{\textsuperscript{1} Tables may have a footer.}} -\end{table} - -The text continues here (Figure~\ref{fig2} and Table~\ref{tab2}). - -% Example of a figure that spans the whole page width and with subfigures. The same concept works for tables, too. -\begin{figure}[H] -%\isPreprints{}{% This command is only used for ``preprints''. -\begin{adjustwidth}{-\extralength}{0cm} -\centering -%} % If the paper is ``preprints'', please uncomment this parenthesis. -\subfloat[\centering]{\includegraphics[width=7.0cm]{Definitions/logo-mdpi}} -%\hfill -\subfloat[\centering]{\includegraphics[width=7.0cm]{Definitions/logo-mdpi}}\\ -\subfloat[\centering]{\includegraphics[width=7.0cm]{Definitions/logo-mdpi}} -%\hfill -\subfloat[\centering]{\includegraphics[width=7.0cm]{Definitions/logo-mdpi}} -%\isPreprints{}{% This command is only used for ``preprints''. -\end{adjustwidth} -%} % If the paper is ``preprints'', please uncomment this parenthesis. -\caption{This is a wide figure. Schemes follow the same formatting. If there are multiple panels, they should be listed as follows: (\textbf{a}) Description of what is contained in the first panel. (\textbf{b}) Description of what is contained in the second panel. (\textbf{c}) Description of what is contained in the third panel. (\textbf{d}) Description of what is contained in the fourth panel. Figures should be placed in the main text near the first time they are cited.\label{fig2}} -\end{figure} - -\begin{table}[H] -\caption{This is a wide table. Tables should be placed in the main text near the first time they are~cited.\label{tab2}} -%\isPreprints{\centering}{% This command is only used for ``preprints''. - \begin{adjustwidth}{-\extralength}{0cm} -%} % If the paper is ``preprints'', please uncomment this parenthesis. -%\isPreprints{\begin{tabularx}{\textwidth}{CCCC}}{% This command is only used for ``preprints''. - \begin{tabularx}{\fulllength}{CCCC} -%} % If the paper is ``preprints'', please uncomment this parenthesis. - \toprule - \textbf{Title 1} & \textbf{Title 2} & \textbf{Title 3} & \textbf{Title 4}\\ - \midrule -\multirow[m]{3}{*}{Entry 1 *} & Data & Data & Data\\ - & Data & Data & Data\\ - & Data & Data & Data\\ - \midrule -\multirow[m]{3}{*}{Entry 2} & Data & Data & Data\\ - & Data & Data & Data\\ - & Data & Data & Data\\ - \bottomrule - \end{tabularx} -% \isPreprints{}{% This command is only used for ``preprints''. - \end{adjustwidth} -%} % If the paper is ``preprints'', please uncomment this parenthesis. - \noindent{\small{* Tables may have a footer.}} -\end{table} - -%\begin{listing}[H] -%\caption{Title of the listing} -%\rule{\columnwidth}{1pt} -%\raggedright Text of the listing. In font size footnotesize, small, or normalsize. Preferred format: left aligned and single spaced. Preferred border format: top border line and bottom border line. -%\rule{\columnwidth}{1pt} -%\end{listing} - -Text. - -Text. - -\subsection{Formatting of Mathematical Components} - -This is example 1 of an equation: -\begin{equation} -a = 1, -\end{equation} -the text following an equation need not be a new paragraph if it continues a sentence. Please punctuate equations as regular text. - -This is example 2 of an equation: -%\isPreprints{}{% This command is only used for ``preprints''. -\begin{adjustwidth}{-\extralength}{0cm} -%} % If the paper is ``preprints'', please uncomment this parenthesis. -\begin{equation} -a = b + c + d + e + f + g + h + i + j + k + l + m + n + o + p + q + r + s + t + u + v + w + x + y + z -\end{equation} -%\isPreprints{}{% This command is only used for ``preprints''. -\end{adjustwidth} -%} % If the paper is ``preprints'', please uncomment this parenthesis. - -If the text following an equation starts a new sentence, it should be a new paragraph. Please punctuate equations as regular text. - -%% Example of a page in landscape format (with table and table footnote). -%\startlandscape -%\begin{table}[H] %% Table in wide page -%%\isPreprints{\centering}{} % This command is only used for ``preprints''. -%\caption{This is a very wide table.\label{tab3}} -% \begin{tabularx}{\textwidth}{CCCC} -% \toprule -% \textbf{Title 1} & \textbf{Title 2} & \textbf{Title 3} & \textbf{Title 4}\\ -% \midrule -% Entry 1 & Data & Data & This cell has some longer content that runs over two lines.\\ -% Entry 2 & Data & Data & Data\textsuperscript{1}\\ -% \bottomrule -% \end{tabularx} -%%\isPreprints{}{% This command is only used for ``preprints''. -% \begin{adjustwidth}{+\extralength}{0cm} -%%} % If the paper is ``preprints'', please uncomment this parenthesis. -% \noindent\small{\textsuperscript{1} This is a table footnote.} -%%\isPreprints{}{% This command is only used for ``preprints''. -% \end{adjustwidth} -%%} % If the paper is ``preprints'', please uncomment this parenthesis. -%\end{table} -%\finishlandscape - -Theorem-type environments (including propositions, lemmas, corollaries, etc.) can be formatted as follows: -%% Example of a theorem: -\begin{Theorem} -Example text of a theorem. Theorems, propositions, lemmas, etc., should be numbered sequentially (i.e., Proposition 2 follows Theorem 1). Examples or Remarks use the same formatting, but should be numbered separately, so a document may contain Theorem 1, Remark 1 and Example~1. -\end{Theorem} - -The text continues here. Proofs must be formatted as follows: - -%% Example of a proof: -\begin{proof}[Proof of Theorem 1] -Text of the proof. Note that the phrase ``of Theorem 1'' is optional if it is clear which theorem is being referred to. -\end{proof} -The text continues here. diff --git a/sections/introduction.tex b/sections/introduction.tex deleted file mode 100644 index 7157fd3..0000000 --- a/sections/introduction.tex +++ /dev/null @@ -1 +0,0 @@ -The introduction should briefly place the study in a broad context and highlight why it is important. It should define the purpose of the work and its significance. The current state of the research field should be reviewed carefully and key publications cited. Please highlight controversial and diverging hypotheses when necessary. Finally, briefly mention the main aim of the work and highlight the principal conclusions. As far as possible, please keep the introduction comprehensible to scientists outside your particular field of research. Citing a journal paper \citep{ref-journal}. Now citing a book reference \citep{ref-book1,ref-book2} or other reference types \citep{ref-unpublish,ref-url}. Please use the command \citep{ref-proceeding,ref-thesis} for the following MDPI journals, which use author--date citation: Administrative Sciences, AI in Education, Arts, Behavioral Sciences, Businesses, Econometrics, Economies, Education Sciences, European Journal of Investigation in Health, Psychology and Education, Family Sciences, Future Collections, Libraries, Archives, and Museums, Games, Genealogy, Histories, Humanities, Humans, International Journal of Cognitive Sciences, International Journal of Financial Studies, Investment, Journal of Intelligence, Journalism and Media, Journal of Risk and Financial Management, Journal of Strategic and Applied Marketing, Languages, Laws, Literature, Operations Management, Peace Studies, Project Management Horizons, Psychology International, Publications, Religions, Risks, Social Sciences, Tourism and Hospitality, Youth. diff --git a/sections/method.tex b/sections/method.tex deleted file mode 100644 index a31772e..0000000 --- a/sections/method.tex +++ /dev/null @@ -1,11 +0,0 @@ -The Materials and Methods should be described with sufficient detail to allow others to replicate and build on the published results. Please note that the publication of your manuscript implies that you must make all materials, data, computer code, and protocols associated with the publication available to readers. Please disclose at the submission stage any restrictions on the availability of materials or information. New methods and protocols should be described in detail while well-established methods can be briefly described and appropriately cited. - -Research manuscripts reporting large datasets that are deposited in a publicly available database should specify where the data have been deposited and provide the relevant accession numbers. If the accession numbers have not yet been obtained at the time of submission, please state that they will be provided during review. They must be provided prior to publication. - -Interventionary studies involving animals or humans, and other studies that require ethical approval, must list the authority that provided approval and the corresponding ethical approval code. - -In this section, where applicable, authors are required to disclose details of how generative artificial intelligence (GenAI) has been used in this paper (e.g., to generate text, data, or graphics, or to assist in study design, data collection, analysis, or interpretation). The use of GenAI for superficial text editing (e.g., grammar, spelling, punctuation, and formatting) does not need to be declared. - -\begin{quote} -This is an example of a quote. -\end{quote} diff --git a/sections/related_work.tex b/sections/related_work.tex deleted file mode 100644 index caf8951..0000000 --- a/sections/related_work.tex +++ /dev/null @@ -1,11 +0,0 @@ -% TODO: Related Work. -% This section did not exist in the original MDPI template (which goes -% straight from Introduction to Materials and Methods) -- it is new for -% this manuscript. Summarize prior work on IVUS-based prediction of -% no-reflow/slow-flow after PCI and related CNN-LSTM / image-based -% approaches, positioning this paper's contribution relative to it. -% -% Per CLAUDE.md: Reference/main.tex, Reference/main_ja.tex, and the -% thesis PDF are useful for prose style and terminology, but any numbers, -% dataset descriptions, or results cited here must come from current -% data the user provides -- not copied from those older documents.